Last night and this morning was spent sanding, sanding, and more sanding. The lines from the fiberglass tape were visible and I wanted to smooth everything down as much as possible. I then added one more layer of epoxy to fill all exposed fiberglass cloth from the sanding and to smooth everything out. The sides were not completely epoxied because there will be tape added with the keel is attached to the bottom. If you look closely at these photos and the ones from before, you should be able to see the difference where the fiberglass tape is.
I was going to do the bottom next, but I think I will go ahead and make the transom. I will need two 2x6's and one 2x4 for the jig to bend and epoxy the transom pieces together, so off to Lowes I goes.
No comments:
Post a Comment