Tuesday, August 17, 2010

Bottom Attached to Keel



The bottom was epoxied to the keel with the first layer of un-thickened epoxy and then a layer of epoxy/wood flour on the entire surface of the keel that attached to the bottom. I used wood screws and washers to tighten everything down. A little weight was used in a couple of areas to help it contour to the keel better.
After this dries, I will be filling all of the holes with a epoxy/wood flour mixture and then fiberglass the entire top side of the bottom. Then I can install the seats, fence, etc.
2 hours

No comments:

Post a Comment