Today, I nailed down the quarter round strip on the forward side of the transom to the planing doubler after applying non-filled epoxy and then a epoxy/wood flour mix. I then filleted the part to mess nicely with the transom and bottom of the boat. I also used the epoxy/wood flour mix to fillet the aft side. Then I fiberglassed taped the transom with 4" tape on the forward and aft sides and filled with epoxy. I have also waited about two hours and applied another layer of epoxy to fill the weave. One or two more layers of epoxy should take care of that.
4.5 hours
No comments:
Post a Comment