5 hours
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
This journal will document the building of my second boat, a "Perfect 10" Mini-Tug Boat.
Search This Blog
Total Pageviews
Tinytanic
Followers
Blog Archive
-
▼
2011
(81)
-
▼
April
(20)
- Taped Bottom of Front Deck/Layer of Epoxy
- Applied Additional Layer of Epoxy on Bottom
- Applied Epoxy on Keel and Bottom
- Sanded All Bottom Tapes and Hull Bottom
- Rounded and Taped Bottom Corners; Sanded Down Keel
- Sanded Both Sides; Flipped Boat Over; Sanded Down ...
- Left Side Hull Exterior Fiberglassed
- Right Side Hull Exterior Fiberglassed
- Sanded, Sanded, and Epoxied Again
- Rear Seat Taped, Beaver-tail Taped, Rear Seat Top ...
- Installed Rear Seat Back Piece
- Rear Seat Doubler Epoxied on Bottom
- Rear Seat Doubler Cut Out and Epoxied On
- Sanded Re-filled Holes/Fiberglassed Bottom of Rear...
- Sanded Filled Holes/Fiberglassed Rear Seat Top/Rou...
- Screws Removed and Holes Filled
- Right Side Hull Doublers Epoxied On
- Left Side Hull Doublers Epoxied On
- Both Hull Sides Now Set
- Sanded All of the Newly Taped Areas/Began Attachin...
-
▼
April
(20)
No comments:
Post a Comment