Today, I epoxied some spots that were needing a little extra before paint; i.e. I sanded through some very small spots. And, I also drilled out the right mid bulkhead where the control cables and electrical wire will go and epoxied that as well. I also epoxied the big hole where the steering system goes.
The trailer front stop was welded on where it will hole the rubber Y-Stop to keep the boat from moving forward on the trailer when towing. Again, the welds were not great but will do the job! I also sanded them down for prime a paint, which will be put on tomorrow.
A spare tire holder was also installed a couple of days ago.
5.5 hours
You'll be floating before you know it. Nice job so far!
ReplyDelete