The last few days, I have finally got to the window frames and Coast Guard stripes.
I used poster board paper to mark the inside edge of each window, then marked out 1" from that line which gave me the outline of the window frames. I tranfered it onto the plywood and cut them out and have now put two coats of epoxy on one side of them. The other coats will go on today.
I have also taped off and painted the white stripe of the Coast Guard stripes that will be on the hull sides.
I also installed the left seat and the steering helm with steering wheel, as well as the rear seat hinges.
7 hours.
No comments:
Post a Comment