Test Fit The Outboard; Window Frames Second Coat

Yesterday, I put on a second coat of black on the window frames and hung them up to dry before attaching them to the cabin.
I also test fit the 25 HP Johnson outboard motor to the transom. It did not set flush to the top of the transom due to back of the boat motor mount having a curvature to it. So, I had to remove it and sand a small area on each side to account for that, as well as put some more epoxy on them to seal them. I also drilled a hole in the lower part of the mount to put a 1/4" bolt through the transom to give it more support. The holes that are already in the motor mount are too far outboard. I still may put a lag screw there, but I doubt it.
5 hours